期刊论文

1.Xiaojun Shi,Jianmin Gao, Brian Agnew, Wanyin Liang, Wei Wang. Experimental and Numerical study of an integrated air and steam cooled gas turbine vane. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, 2015,229:240-255.

2. Xiaojun Shi*, Jianmin Gao, Liang Xu, Fajin Li. Heat transfer performance comparison of steam and air in gas turbine cooling channels with different rib angles [J]. Heat and Mass Transfer. 2013,49:1577-1586.

3.  Xiaojun Shi*, J Gao, L Xu, L Shui, F Li and J Liu. Experimental investigation on heat transfer and friction characteristics of ribbed rectangular channels using steam as coolant [J]. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, 2013, 227(4):426-437.
4.  Xiaojun Shi, Brian Agnew, Defu Che. Analysis of a Combined Cycle Power Plant Integrated with a Liquid Natural Gas Gasification and Power Generation System [J]. Proceedings of the Institution of Mechanical Engineers, Part A, Journal of Power and Energy, 2011, 225:1-11.
5.  Xiaojun Shi, Brian Agnew, Defu Che, Jianmin Gao. Performance enhancement of conventional combined cycle power plant by inlet air-cooling, intercooling and LNG cold energy utilization[J]. Applied Thermal Engineering. 2010, 30:2003-2010
6.  Xiaojun Shi, Defu Che, Brian Agnew, Jianmin Gao. An investigation of the performance of compact heat exchanger for latent heat recovery from exhaust flue gases [J]. International Journal of Heat and Mass Transfer. 2011, 54: 606–615.
7. Huan Wang, Xiaojun Shi, Defu Che. Thermodynamic optimization of the operating parameters for a combined power cycle utilizing low-temperature waste heat and LNG cold energy [J]. Applied Thermal Engineering.2013,59: 490-497.
8. Linqi Shui, Jianmin Gao, Xiaojun Shi*, Jiazeng Liu. Effect of duct aspect ratio on heat transfer and friction in steam-cooled ducts with 60o angled rib turbulators [J] Experimental Thermal and Fluid Science 49 (2013) 123134.
9. Linqi Shui, Jianmin Gao, Xiaojun Shi*, Liang Xu. The effect of cooling conditions on convective heat transfer and flow in a steam-cooled ribbed duct [J]. Journal of Mechanical Science and Technology,2013.
10.  Jiazeng Liu, Jianmin Gao, Tieyu Gao, Xiaojun Shi(史晓军). Heat transfer characteristics in steam-cooled rectangular channels with two opposite rib-roughened walls. Applied Thermal Engineering 201350,104-111.
11.  Jiazeng Liu, Jianmin Gao, Tieyu Gao, Xiaojun Shi史晓军. Heat Transfer in Narrow Rectangular Channels with Rib Turbulators [J]. Advanced Materials Research, 2011, 354-355: 1245-1251.
12. Wang Wei, Gao Jianmin, Xu Liang, Shi Xiaojun史晓军. Flow and Heat Transfer Characteristics in Rotating Two-pass Channels Cooled by Superheated Steam. Chinese Journal of Aeronautics, 25(4), 524-532, 2012/8.
13.  Wang Wei, Gao Jianmin, Shi Xiaojun史晓军,Xu Liang. Cooling performance analysis of steam cooled gas turbine nozzle guide vane [J]. International Journal of Heat and Mass Transfer. 2013, 62: 668–679.
14.  Wei Wang, Jianmin Gao, Xiaojun Shi(史晓军), Liang Xu, Zhao Wang, Fumin Chen. Experimental Study on Comparison of Cooling Effectiveness between Steam and Air for a Gas Trubine Nozzle Guide Vane[C]. ASME Paper Proceedings of ASME Turbo Expo 2012: GT2012-68691.
15.  史晓军,税琳棋,高建民,徐亮,刘加增. 蒸汽冷却带肋矩形通道传热和压降实验关联式[J], 西安交通大学学报,2013.47(11):1-6.
16. 史晓军 王维 高建民 徐亮 董俊飞.透平叶片双工质冷却特性实验研究[J], 西安交通大学学报. 2013.47(10):1-6.
17.  徐亮,税琳棋,高建民,史晓军*,王维,李小明.透平叶片双工质冷却流量和流向的优化配置研究[J],西安交通大学学报,2012.5:7-12.
18.  税琳棋,高建民,刘加增,徐亮,史晓军*. 不同冷却工况下90°带肋通道中蒸汽的强化换热特性研究[J], 西安交通大学学报,2012.46:6-11.
19.  高建民, 史晓军, 许艾明, 赵博选. 高速高精度机床热分析与热设计技术[J]. 中国工程科学 1 (2013) 28-33.
20.  Xiaojun Shi, Defu Che. A combined power cycle utilizing low-temperature waste heat and LNG cold energy [J]. Energy Conversion and Management, 2009, 50 (3): 567-575.
21.  Xiaojun Shi, Defu Che. Thermodynamic analysis of an LNG fuelled combined cycle power plant with waste heat recovery and utilization system [J]. International journal of energy research, 2007, 31 (10): 975-998.
22.史晓军,车得福,王欢. 对一种具有余热回收系统的LNG联合循环电站分析 [J]. 热能动力工程, 2009,24 (1):47-52.
23.史晓军,车得福. 液化天然气(LNG)联合循环电站热力学分析 [J]. 华东电力, 2008, 36(10): 100-104.
24.高东明,史晓军. 冷凝式空气加热器回收燃天然气锅炉排烟余热的分析 [J]. 工业锅炉, 2005, 6: 1-6.
25. 史晓军,税琳棋,陶小兵,高建民,李法敬. 叶片内冷通道中采用汽雾换热和蒸汽换热的实验研究 [J], 中国电机工程学报,2015. 35(12)3061-3067

26.晓军,税琳棋,高建民,李法敬. 汽雾两相流强化冷却燃机叶片内冷通道[J],航空动力学报, 2015, 30(11):2561-2567.

27.史晓军, 康跃, 樊利军,. 永磁同步电机电主轴热-结构耦合计算方法[J]. 华中科技大学学报:自然科学版,2017,45(2):50-54.

28. 康跃然,史晓军*,高建民,.一种新型轴芯冷却电主轴的热特性分析[J].西安交通大学学报,2017,51(01):13-18.

29.康跃然,史晓军*,高建民,.多参量耦合的电主轴热特性建模及分析[J].西安交通大学学报,2016,50(08):32-37.

30.Liang Xu, Wei Wang, Tieyu Gao*, Xiaojun Shi, Jianmin Gao, Wanyin Liang. Experimental study on cooling performance of a steam-cooled turbine blade with five internal cooling smooth channels [J]. Experimental Thermal and Fluid Science, 58: 180-187. 2014.

31.Wei Wang, Jianmin Gao, Liang Xu*, Xiaojun Shi. Experimental study and prediction of film cooling effectiveness on a guide blade in heavy gas turbine [C]. Proceedings of the 15th International Heat Transfer Conference2014,日本京都.

32.史晓军,姜广文,高建民. 叶片内冷通道中汽雾两相流的换热特性 [C].中国工程热物理学会工程热力学与能源利用、热机气动热力学和流体机械学术会议,2015,中国厦门.

33.李法敬,高建民,史晓军*,梁锋,唐瑞.电主轴轴心冷却用环路热虹吸管的传热特性[J].西安交通大学学报,2017,51(7):90-9.

34.Xiaojun Shi*, Shan Li, Yadong Wei, Jianmin Gao.Numerical investigation of laminar convective heat transfer and pressure drop of water-based Al2O3 nanofluids in a microchannel [J].International Communications in Heat and Mass Transfer 90 (2018) 111–120

35.Guangwen Jiang, Xiaojun Shi*, Guanwen Chen, Jianmin Gao.Study on flow and heat transfer characteristics of the mist/steam two-phase flow in rectangular channels with 60 deg. ribs [J].International Journal of Heat and Mass Transfer 120 (2018) 1101–1117.

36.姜广文,史晓军,高建民. 汽雾两相流在带60 肋叶片内冷通道中换热强化实验研究. 科技论文在线. 2016.

37. 税琳棋,黄博,董坤坤,史晓军,李法敬. 燃气透平叶片树状分形内冷微通道的换热特性实验研究.[J].西安交通大学学报,2017,51(11):43-50.

38.Fajing Li, Jianmin Gao, Xiaojun Shi, Feng Liang, Ke Zhu. Experimental investigation of single loop thermosyphons utilized in motorized spindle shaft cooling[J].  Applied  Thermal Engineering 134 (2018) 229–237

39.史晓军,李珊,魏亚东. 纳米流体矩形微通道热沉结构参数多目标优化[J]. 西安交通大学学报,2018,52:1-5.

40.朱科,史晓军,高建民,李法敬. 轴芯冷却电主轴热特性分析的数值模拟与实验研究[J].西安交通大学学报,2018,52(4):1-7.

41.Li-jun Fan, Xiao-jun Shi*, Ke Zhu Jian-min Gao. Experimental study on the effect of coolant on the thermal characteristics of gear grinding machine under load[J].Int. J. Mechatronics and Manufacturing Systems,2018,11(1):1-14

42.Xiao-jun Shi*, Ke Zhu,Weiku Wang,Lijun Fan,Jianmin Gao.A thermal characteristic analytic model considering cutting fluid thermal effect for gear grinding machine under load[J].The International Journal of Advanced Manufacturing Technology,2018,16(1):1-15.

发明专利

1.  史晓军,康跃然,高建明. 一种电主轴轴芯冷却结构及系统[P]. 专利号:201410344227.8

2. 史晓军,朱科,高建民等.一种高速电主轴内外冷却结构及温度协同控制系统:中国,201710829294.2[P]2017-9-14[2]     

3. 车得福,史晓军. 一种提高联合循环电厂效率的系统和方法: 中国,ZL 2005 10043173.2 [P]. 2009-2-18
4. 徐亮;高建民;史晓军;李云龙;王维;税琳棋.一种重型燃机高温涡轮双工质冷却叶片[P]. 专利号:201110371097