期刊论文

 

2016

[1]        Tingting Zhao, Weitao Jiang*, Hongzhong Liu. Infrared-driven Flexible Pyroelectric Generator for Non-contact Energy Harvester. Nanoscale, 2016, Accept. (IF: 7.4). (通讯作者)

[2]        Fan Fan, Lanlan Wang, Weitao Jiang*, Bangdao Chen and Hongzhong Liu. A novel polyethylene microfiltration membrane with highly permeable ordered 'wine bottle' shaped through-pore structure fabricated via imprint and thermal field induction. Journal of  Physics. D: Applied. Physics. 2016, 49, 125501. (通讯作者)

[3]        Hongzhong Liu, Lanlan Wang, Weitao Jiang*. Bio-inspired Eyes with Eyeball-shaped Lenses Actuated by Electro-Hydrodynamic Forces. RSC Advances. 2016, Accept. ( IF=3.8). (通讯作者)

[4]        Hongzhong Liu, Wei Jiang, Weitao Jiang*. Enhanced photovoltaic performance of dye-sensitized solar cells with TiO2 micro/nano-structures as light scattering layer. JOURNAL OF MATERIALS SCIENCE MATERIALS IN ELECTRONICS. 2015, ( IF=1.57). (通讯作者)

[5]        Biao Lei, Hongzhong Liu, Weitao Jiang*. Transparent film with inverted conical microholes array for reflection enhancement. Applied Surface Science. 2016, 369, 143-150. (IF=2.3). (通讯作者)

[6]        Hongzhong Liu, Biao Lei, Weitao Jiang*. Ultrasound-assisted recovery of free-standing high-aspect-ratio micropillars. RSC Advances. 2016, Accept. (IF=3.8). (通讯作者)

[7]        Rui Li, Lanlan Wang, Hongzhong Liu , Weitao Jiang*. Tunable mirolens array with a large fill-factor: self-assembly fabrication and electrodrodynamic actuation. Sensors and Actuators A: Physical. 2016, Accept. ( IF=1.93). (通讯作者)

[8]        Hongzhong Liu, Dong Niu, Weitao Jiang*. Illumination-oriented and thickness-dependent photomechanical bilayer actuators realized by graphene-nanoplatelets. Sensors and Actuators A: Physical. 2016, 239, 45-53. (IF=1.93). (通讯作者)

 

2015

[9]        Hongzhong Liu, Shuya Zhu, Weitao Jiang*. Rapid flame synthesis of multilayer graphene on SiO2/Si substrate. JOURNAL OF MATERIALS SCIENCE MATERIALS IN ELECTRONICS. 2015, ( IF=1.57). (通讯作者)

[10]     Hongzhong Liu, Tingting Zhao, Weitao Jiang*, Rui Jia, Dong Niu, Guanglin Qiu, Lin Fan, Xin Li, Weihua Liu, Lei Yin, Yongsheng Shi, Bangdao Chen, Bingheng Lu. Flexible battery-less bioelectronic implants: wireless powering and manipulation by near infrared light. Advanced Functional Materials. 2015, 25(45), 7071–7079. ( IF=11.8). (通讯作者)

[11]     Lanlan Wang, Fang Li, Hongzhong Liu, Weitao Jiang*, Dong Niu. graphene-based bio-inspired compound eyes for programmable focusing and remote actuation. ACS Applied Materials & Interfaces. 2015, 7 (38), 21416–21422. (IF=6.7). (通讯作者)

[12]     Haoyu Yu, Hongzhong Liu, Xuan Li, Guoyong Ye, Yongsheng Shi, Lei Yin, Weitao Jiang*. Calibration of non-contact incremental linear encoders using a macro–micro dual-drive high-precision comparator. Measurement Science and Technology. 2015, 26(9), 095103 ( IF=1.43). (通讯作者)

[13]     Wei Jiang, Hongzhong Liu, Lei Yin, Weitao Jiang, Yucheng Ding. Fabrication of Enhanced Electron Transport Layer by Laser Scanning Technology for Dye-sensitized Solar Cells. Electrochimica Acta, 2015, 176, 1036–1043. ( IF=4.1)

[14]     Lanlan Wang, Hongzhong Liu, Weitao Jiang*, Rui Li, Fang Li, Zhongbo Yang, Lei Yin,  Yongsheng Shi Bangdao Chen. Capillary number encouraged the construction of smart biomimetic eyes. Journal of Materials Chemistry C. 2015, 3, 5896-5902. ( IF=4.69) 封面文章. (通讯作者)

 

2014

[15]     Lanlan Wang, Weitao Jiang*, Hongzhong Liu, Zhongbo Yang, Yongsheng Shi, Lei Yin, et al. Adjusting light distribution for generating microlens arrays with controllable profile and fill factor. Journal of Micromechanics and Microengineering. 2014, 24(12), 125012. ( IF=1.79). (通讯作者)

[16]     Lanlan Wang, Hongzhong Liu, Weitao Jiang*, Wei Gao, Bangdao Chen, Xin Li, Yucheng Ding, Ningli An. Freestanding membrane composed of micro-ring array with ultrahigh sidewall aspect ratio for application in lightweight cathode arrays. Applied Surface Science. 2014, 332, 28-34. ( IF=2.71). (通讯作者)

[17]     Weitao Jiang, Dong Niu, Hongzhong Liu, Chaohui Wang, Tingting Zhao, Lei Yin, Yongsheng Shi, Bangdao Chen, Yucheng Ding, Bingheng Lu. Photoresponsive Soft-Robotic Platform: Biomimetic Fabrication and Remote Actuation. Advanced Functional Materials. 2014,24(48),7598-7604. (IF=11.8)封面文章

[18]     Tengfei Zheng, Chaohui Wang, Dong Niu, Weitao Jiang, Yongsheng Shi, Lei Yin, Bangbao Chen, Hongzhong Liu, Yucheng Ding. Exploitation of surface acoustic waves to drive nanoparticle concentration within an electrification-dependent droplet. RSC Advances. 2014, 4 (79), 46502-46507. (IF=3.71)

[19]     Weitao Jiang, lanlan wang, Hongzhong Liu, Haoyun Ma, Hongmiao Tian, Bangdao Chen, Yongsheng Shi, Lei Yin, Yucheng Ding, Bio-inspired directional high-aspect-ratio nanopillars: fabrication and actuation. RSC Advances, 2014. 4 (79), 42002-42008. ( IF=3.71)

[20]     Weitao Jiang, Hongzhong Liu, Bangdao Chen et al. A novel roller imprint process for nano-positioning gratings fabrication. Proceedings of the 4th International Conference on Nanomanufacturing. 2014, Accept.

[21]     Weitao Jiang, Hongzhong Liu, Lanlan Wang, Shuya Zhu et al. An effective route for transparent and superhydrophobic coating with high mechanical stability. Thin Solid Films. 2014, 562, 383–388. ( IF=1.87)

[22]     Weitao Jiang, Hongzhong Liu, Yucheng Ding. Inherent constraint for three-dimensional patterning by microtransfer molding. Materials and Manufacturing Processes. 2014, 29 59-63. (IF: 1.63)

[23]     R.M. Heath, M.G. Tanner, A.C. Casaburi, M.G. Webster, L. San-Emeterio-Alvarez, Weitao Jiang. Nano-optical observation of cascade switching in a parallel superconducting nanowire single photon detector. Applied Physics Letter. 2014, 104, 063503

 

 

2013

[24]     Shuya Zhu, Weitao Jiang, Hongzhong Liu, et al. Bioinspired uniform illumination by vibrated sessile droplet pinned by a hydrophilic/superhydrophobic heterogeneous surface. Optics Letters, 2013, 38(15), 3720-3722. (IF=3.7)

[25]     Weitao Jiang, Hongzhong Liu, Yucheng Ding. Selective-Filling Mold for Residual-Layer-Free Patterning of 3D Microstructures. Materials and Manufacturing Processes. 28(2013), 101-105. (IF: 1.63)

[26]     Heath, R.M. Tanner, M.G., San-Emeterio-Alvarez, L, Jiang, W.; Nano-optical measurements of novel superconducting single photon detector designs. The European Conference on Lasers and Electro-Optics, CLEO_Europe 2013. (IEEE国际会议)

[27]     杨俊,蒋维涛*,王兰兰等,曲面仿生复眼透镜微复型过程变形分析,西安交通大学学报,2013,47(5), 121-125. (通讯作者,

[28]     冯龙,蒋维涛*,刘红忠等,步进式旋转光刻制备柱面微结构光栅模具,微纳电子技术,2013,50(5), 316-321. (通讯作者)

 

2012年及以前

[29]     M.G. Tanner, L. San-Emeterio-Alvarez, W. Jiang, R.J. Warburton, Z.H. Barber and R.H. Hadfield. A superconducting nanowire single photon detector on lithium niobate. Nanotechnology, 2012, 23, 505201.

[30]     Hongzhong Liu, Yongsheng Shi, Lei Yin, Weitao Jiang, Bingheng Lu. Roll-to-roll imprint for high precision grating manufacturing. Engineering Sciences. 2013, 11(1), 39-43.

[31]     Weitao Jiang, Najeeb Ullah., Giorgio Divitini et al. Vertically oriented TiOxNy nano-pillar arrays with embedded Ag nanoparticles for visible-light photocatalysis[J]. Langmuir, 2012, 28, 5427−5431. (IF=4.26).

[32]     Weitao Jiang, Hongzhong Liu, Yucheng, Ding, Yiping Tang, et al. Investigation of ink transfer in roller-reversal imprint process. Journal of Micromechanics and Microengineering. 2009, 19(1), 015033. (IF=2.28)

[33]     Weitao Jiang, Yucheng Ding, Hongzhong Liu, Bingheng Lu, et al. Two-step curing method for demoulding in UV nanoimprint lithography[J]. Microelectronic Engineering. 2008, 85(2), 458-464. (IF=1.57)

[34]     Weitao Jiang, Kartik Senapati, Lara San-Emeterio-Alvarez, Nadia A. Stelmashenko, et al. Nanoporous metallic templates for embedded magnetic nanostructured films[J]. Thin Solid Films, 2011, 520(1), 533-536. (IF=1.93)

[35]     Weitao Jiang, Hongzhong Liu, Yucheng Ding, Yongsheng Shi, et al. Investigation of pattern coating on mould roller in roller-reversal imprint process[J]. Microelectronic Engineering, 2009, 86(12), 2412-2416.(IF=1.57);

[36]     Hongzhong Liu, Weitao Jiang, Yucheng, Ding, Yiping Tang, et al. A novel loading and demoulding process control in UV nanoimprint lithography[J]. Microelectronic Engineering. 2009, 86(1), 4-9. (IF=1.57);

[37]     Hongzhong Liu, Weitao Jiang*, Yucheng Ding, Yongsheng Shi, et al. Roller-reversal imprint process for preparation of large-area microstructures[J]. Journal of Vacuum Science & Technology B. 2010, 28(1), 104-109. (IF=1.27)

[38]     Xin Ren, Kartik Senapati, Weitao Jiang, Chuanhai Jiang. Formation of ordered TiO2 nanostructural arrays with tunable shapes by magnetron sputtering method[J]. Materials Chemistry and Physics, 2011, 126, 1-5. (IF=2.35)

[39]     Hongzhong Liu, Yucheng Ding, Weitao Jiang, Qin Lian et al. Novel imprint lithography process used in fabrication of micro/nanostructures in organic    photovoltaic devices[J]. Journal of Micro/Nanolithography, MEMS, and MOEMS, 2009, 8(2), 021170. (IF=1.19).

[40]     Yongsheng Shi, Yucheng Ding, Hongzhong Liu, Weitao Jiang, and Bingheng Lu. Growth of patterned and aligned carbon nanotube bundles on micro-      structured substrate[J]. Applied Surface Science, 2009, 255(17), 7713-7718. 

 

专利

 

1.      基于机械力拉伸的大深宽比纳米纤维结构及其制备方法CN103434127B,已授权,排名:1
2.      以时间基准为参照的精密光栅制造方法,ZL201210371250.7,已授权,排名:2
3.      以石墨烯键长为基准的超精密制造装备精度及精度补偿方法,201210371547.3,已授权,排名:2
4.      一种可捕获分子靶标感知触角的制造及位姿操控方法,201510363661.5,已公开,排名:1
5.      以石墨烯键长作为计量基准的长度计量溯源方法,201210371352.9,已公开,排名:2
6.      一种可增强光反射柔性薄膜的制造方法,CN104914487A,已公开,排名:3
7.      柔性基宏电子制造中微结构的大面积逆辊压印方法,CN100575243,已授权,排名:3
8.      等离子体显示器平板障壁的大面积压印成型方法,CN100561638,已授权,排名:3
9.      一种微米级特征的三维辊压模具及其制造方法,CN101086614B,已授权,排名:3
10. 全禁带三维光子晶体压印成型方法,CN101303524B,已授权,排名:4
11. 非接触式模板约束下的电场诱导微复型方法,CN101446762B,已授权,排名:4
12. 一种机床测量用光栅尺保护膜的涂覆方法,CN102555415B,已授权,排名:5
13. 一种单码道绝对式光栅尺辊压印模具制造方法,CN102759855A,已授权,排名:5
14. 单码道绝对式光栅尺辊压印制造方法,CN102759857A,已授权,排名:5
15. 超长光栅尺辊压模具表面图形化的快速加工方法,CN102566260A,已授权,排名:5
16. 一种光栅尺辊压印生产线,CN202421718U,已授权,排名:5
17. 一种绝对式光栅尺辊压印模具,CN202421720U,已授权,排名:5
18. 一种机床用长光栅辊压印模具精密电铸加工方法,CN102758226A,已授权,排名:6
19. 激光辅助辊压印制造机床用反射型长光栅工艺方法,CN102759856A,已授权,排名:6